6336BFS 1.75
One Piece Roll-In Shower Stall
| Length | 63 3⁄8" | 1610mm |
| Width | 37 1⁄2" | 953mm |
Download Spec Sheet
Shower unit shall be a VENCO Model No.6336BFS. Finished surface shall be of a Premium sanitary grade polyester Gelcoat with a minimal thickness of 15 dry mills.The unit shall have interior dimensions of 60" x 31" x 78 1⁄2" I.D. And outside dimensions of 63 1/8" x 37 1⁄2". Sides and back of unit shall be constructed of molded reinforced fiberglass with 15% minimum fiberglass content plus an inner core of 7/16" Wafer board laminated with another layer of reinforced fiberglass for superior overall rigidity. The approximate weight of the unit shall be 255lbs. To obtain 0" exterior curb, the module must be set into a floor recess.
ADA Accessibility Guidelines ADAAG - Sections 1-4 4.21.7 Curbs. If provided, curbs in shower stalls 36in by 36in (915 mm by 915 mm) shall be no higher than 1⁄2" (13 mm). Shower stalls that are 30in by 60in (760 mm by 915 mm) minimum, shall not have curbs.
Options Available:
1 1⁄4" Stainless Steel "U" Bar
1 1⁄4" Stainless Steel "L" Bar
White Padded Fold-up Seat
Click images below to view additional images
